Name: 300TJQ Submersible Sludge Agitator Pump
Brand: Hydroman
SKU: 300TJQ

Description

Hydroman^® 300TJQ Submersible Sludge Agitator Pump

is a 300mm diameters heavy duty submersible slurry pump, and the agitator installed on bottom submerisble sludge pump prevents solids from settling while the sludge pump discharges the slurry. Hydroman submersible waste water sludge pumps internally installed sensors and controlled by control cabinet prevent catastrophic damage, and agitator sludge submersible pumps heavy duty is extremely suitable for extreme conditions for abrasive, corrosive, and high-density slurries.

Hydroman^® 300TJQ Submersible Sludge Agitator Pump Advantages:
▪ Submersible sludge pump built an agitator, which keeps solids in suspension for efficient pumping;
▪ High-density submersible sludge pump for extracting densely packed material (e.g., mud, sludge, sand, or abrasive particles) with high efficiency;
▪ Submersible slurry sludge pump with submersible design to easily remove the solidified sludge from the bottom of the reservoir;
▪ Versatile heavy duty submersible sludge pump can handles a wide range of fluid viscosities and solid contents;
▪ Pump Submersible Sludge to Transfer Process Solution equipped with triple protection(Thermal Overload Sensor, Moisture Detection Sensor, Oil Leakage Sensor) for safe operation;
▪ Submersible pump for sludge dredging application with waterproof (IP68-rated) work completely underwater without worries.

Hydroman^® 300TJQ Submersible Sludge Agitator Pump Maintenance and repair
▪ When the water pump is not used for a long time, it should be taken out in time, the surface should be wiped clean, the debris on the filter should be removed, anti-rust oil should be applied, and it should be placed in a dry and ventilated place.
▪ After the water pump has been running continuously or cumulatively for 2500 hours, the fasteners and seals should be checked, and the turbine oil and mechanical seals in the oil chamber should be replaced.
▪ After the water pump has been used for one year, it is recommended to carry out maintenance; replace the mechanical seal, oil seal, impeller, agitator, back wear liner, front wear liner and other wearing parts in time.
▪ After the water pump is disassembled and reassembled, the motor cavity and oil chamber must be tested with an air pressure of 0.2Mpa, and there must be no leakage for 5 minutes.

Hydroman^®300TJQ Submersible Sludge Agitator Pump Key Usage

▪ Wastewater and Sewage Treatment	▪ Industrial Waste and Process Slurries	▪ Mining and Mineral Processing
Sludge Mixing in Digesters and Settling Tanks Prevents sludge from compacting at the bottom. Primary and Secondary Clarifiers Keeps biosolids suspended for efficient pumping. Septic Tanks and Lift Stations Agitates and pumps sludge for disposal or further treatment	Chemical and Pharmaceutical Sludge Handles viscous byproducts and sedimentation. Food Processing Waste Pumps organic sludge, fats, and fibrous materials. Paper and Pulp Industry Mixes and transfers fibrous sludge and wastewater residues	Tailings and Slurry Transport Agitates and pumps abrasive mining waste. Sump and Pit Dewatering Removes sludge-laden water from excavation sites
▪ Dredging and Marine Applications	▪ Agriculture and Biogas Plants	▪ Construction and Tunneling
River and Harbor Dredging Suspends and pumps silt, sand, and mud. Ship and Tank Cleaning Removes settled sludge from ballast tanks and bilges	Manure and Slurry Mixing Homogenizes liquid manure for pumping or biogas production. Anaerobic Digesters Maintains consistent mixing for efficient biogas generation	Slurry Wall and Bentonite Mixing Keeps drilling fluids suspended for diaphragm wall construction. Tunnel Dewatering Pumps out sludge from excavation sites