Hydroman Light-type Submersible Slurry Pump with Agitators

What Makes Hydroman^® Light Type Submersible Slurry Pump with Agitator the Smart Choice for Tough Slurry Jobs?

Need a dependable pump that eats through settled solids without clogging? The Hydroman^® Light Type Submersible Slurry Pump with Agitator    is built exactly for that. As an Electric Submersible Pump for Light Slurry Transfer Applications, it runs submerged and stirs up sludge like no other. Also serving as a 6 Inch Submersible Sewage Pump with Agitator System, this unit handles debris‑laden water effortlessly. For dirty wastewater, the Electric Drainage Slurry Pump for Waste Water Handling delivers consistent flow. And the Hydroman^® Vertical Submersible Pump for Sewage and Drainage adds installation flexibility.

This compact yet rugged pump (model 150TBS, 6” discharge) runs on electric power. Its bottom agitator – a hardened high‑chrome impeller – churns settled sand, mud, and industrial waste into a suspended slurry. No more manual stirring or frequent unclogging. Designed for “light‑type” duties but built with heavy‑duty anti wear materials (wear‑resistant alloys), it survives abrasive particles that would shred ordinary pumps. Double mechanical seals, a thermal sensor, and a moisture detector protect the motor even when partially submerged. And because it’s submersible, you drop it into a sump, tank, or trench – no priming, no long suction pipes.

Key Features of the Electric Submersible Pump for Light Slurry Transfer Applications

• Integrated agitator: Breaks up settled solids up to 70% by weight, ensuring continuous suction.
• Abrasion‑resistant wet end: High‑chrome alloy impeller and wear plates extend service life in sandy or silty conditions.
• Internal cooling jacket: Allows the pump to run even when not fully submerged – ideal for dewatering jobs.
• 6” discharge flange: Moves large volumes (up to 300+ m³/h depending on head) without clogging.

Hydroman^® Light-type Submersible Slurry Pump 150TBS Performance Parameter

Where to Deploy the 6 Inch Submersible Sewage Pump with Agitator System

• Construction & Tunneling： Dewatering deep piles, draining mud‑filled sumps, or handling concrete washout – this pump thrives where water mixes with sand and cement fines.
• Industrial Wastewater： Steel mills, power plants, and paper factories generate mill scale, fly ash slurry, and fibrous sludge. The Electric Drainage Slurry Pump for Waste Water Handling pushes these materials to settling ponds or filter presses.
• Mining & Quarrying： Clean settling tanks, transfer tailings, or pump out flooded pits. The agitator keeps heavy solids from settling at the bottom.
• Municipal Sewage & Drainage： Lift stations, stormwater retention ponds, and light sludge removal operations benefit from the pump’s clog‑free design. As a Submersible Wastewater Pump for Light Sludge Removal Operations, it outperforms standard sewage pumps.
• Dredging & Environmental Cleanup： Small‑scale river dredging, sediment pond cleaning, or harbor deepening – the pump’s lightweight body makes it portable while the agitator handles sand and silt.

Frequently Asked Questions (FAQ)

1. How does the Hydroman^® Vertical Submersible Pump for Sewage and Drainage handle partial submersion?

Thanks to its internal cooling jacket, the motor stays cool even when the pump is only half‑submerged. The casing circulates the surrounding liquid around the motor housing. However, for long‑term reliability, we recommend keeping the coolant level above the motor’s mid‑section.

2. Can the Light Duty Electric Slurry Pump with Bottom Agitator run dry without damage?

No pump should run dry for extended periods. But this model includes a built‑in thermal sensor that shuts down the motor if the temperature exceeds safe limits. Plus, the double mechanical seals are oil‑lubricated – they withstand momentary dry runs during startup or when the pit empties accidentally.

3. What’s the difference between this 6” unit and a standard submersible sewage pump?

Standard sewage pumps handle soft solids but fail with abrasive sand or dense slurry. The 6 Inch Submersible Sewage Pump with Agitator System features a high‑chrome agitator and impeller – it cuts through settled grit without wearing out. Also, the agitator actively sweeps the floor, not just passively sucks from above.

4. Is the Submersible Wastewater Pump for Light Sludge Removal Operations easy to maintain?

Yes. The “light‑type” design means fewer bolts and a replaceable wear plate. You can inspect the agitator and impeller by removing just the bottom suction cover. Common wear parts (agitator, impeller, mechanical seal) are stocked for quick field replacement.

Why Operators Prefer This Electric Drainage Slurry Pump for Waste Water Handling

Conventional pumps get buried under settled solids – you waste hours pulling them out, cleaning, and restarting. The Hydroman^® agitator eliminates that cycle. It stirs up a sludge cloud so the pump always “sees” liquid, not a hard cake. This translates to lower energy cost per cubic meter, less downtime, and a safer worksite (no manual digging around electrical equipment).

Moreover, the electric drive means no hydraulic hoses, no power packs, and no oil leaks. Just a single power cable and a control panel. For remote sites, you can pair it with a portable generator.

Ready to Solve Your Slurry Handling Challenges?

Hydroman^® Light‑type Submersible Slurry Pump 150TBS features electric drive, 6 Inch discharge, and built‑in agitator for light slurry, drainage, sewage, and wastewater handling. Efficient submerged pumping performance. Contact us today!

Whether you need to clean a sediment pond, dewater an excavation, or transfer mill scale – this compact powerhouse delivers. Get a quote for your specific duty point. Our engineers help you select the right wear parts and cable length. Don’t let settled solids stop your operation. Reach out now and put the Hydroman^® agitator to work.

Sara Liang

+86 189 3110 6396 (Whatsapp/Wechat)
Inquiry@tobeepump.com